been absent for a while

Ask other modelers for a little help / knowledge ?

been absent for a while

Postby r wheatley » Tue Nov 12, 2013 6:59 pm

I had surgery in sept, and having some complications, but I cant wait to start building again, I have two box's of rubber for motors that is about a year old , what is the shelf life of the rubber ?

thanks, Ronnie
r wheatley
 
Posts: 81
Joined: Wed Dec 05, 2007 11:15 pm
Location: alabama

Re: been absent for a while

Postby r wheatley » Tue Nov 12, 2013 8:07 pm

no one talking ?
r wheatley
 
Posts: 81
Joined: Wed Dec 05, 2007 11:15 pm
Location: alabama

Re: been absent for a while

Postby zoomie » Tue Nov 12, 2013 10:53 pm

r wheatley wrote:no one talking ?


If no one is here, no one is talking :) ! Happened to be browsing thru the Forum and just now noticed your post.

Ronnie, if your two boxes of rubber were in proper storage before you bought them, they can last for a long time. Even years. That's provided that you have kept them properly stored since you received them.

Rubber should be kept away from light as much as possible, as prolonged exposure to light will cause them to deteriorate fairly rapidly.

I also like to keep my rubber in a cool place (the fridge) since I've heard that heat is also not good for them. Don't know how much heat is excessive, I've heard of long-time modelers who store their rubber and motors in desk drawers at room temperature, but room temp. can vary a whole lot! Maybe I'm just being over-cautious with the fridge thing :) .

Hope your surgery complications end soon.

Regards,........zoomie
zoomie
 
Posts: 75
Joined: Tue Apr 30, 2013 7:11 am

Re: been absent for a while

Postby r wheatley » Wed Nov 13, 2013 4:35 pm

thanks for yor help!!

Ronnie
r wheatley
 
Posts: 81
Joined: Wed Dec 05, 2007 11:15 pm
Location: alabama

Re: been absent for a while

Postby BillParker » Wed Nov 13, 2013 7:55 pm

On the shelf in the garage for the summer here in Texas doesn't work out very well...
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas

Re: been absent for a while

Postby Tabitha64 » Wed Nov 13, 2013 8:58 pm

Welcome back, Glad to hear your feeling better :)
Tabitha64
 
Posts: 33
Joined: Sun May 20, 2012 9:59 am

Re: been absent for a while

Postby Wildpig » Wed Nov 13, 2013 9:20 pm

Sometimes there is a lot going on here, sometimes it gets real quiet.

Storing rubber motors in the fridge is fairly common practice. (Probably, for the non-married modelers. :lol: )

Kept in a climate controlled house, sealed in a bag, I would guess 2 years is reasonable storage life.
Wildpig
 
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: been absent for a while

Postby Steve Blanchard » Fri Nov 15, 2013 11:54 am

I have rubber (Tan II, Tan Super Sport) That is ten years old at least and I use for contest flying with no issue. You do need to keep it stored in a cool dry place out of the light. There are guys I fly with that have flown using old Perrelli rubber (that was good stuff a long time ago) That was at least 30 years old and it still held up. So you can keep rubber for a very long time providing you take care of it.

Steve
Steve Blanchard
 
Posts: 343
Joined: Tue Jun 14, 2011 10:08 am

Re: been absent for a while

Postby Scott » Sun Nov 17, 2013 7:07 am

Welcome back. :)
Hawker Sea Fury FB.11 VF-871
Royal Canadian Navy
Scott
 
Posts: 175
Joined: Mon Feb 15, 2010 10:57 am
Location: Ontario,Canada


Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 21 guests