Guillow's Model Builders Forum

by **Squishyp38** » Mon Feb 28, 2011 4:50 pm

i built a 500 series zero (rufe), and I was wondering if 2 pounds was too heavy.... Just kidding! :shock:

I dont know how heavy it really is, but suggestions on flying weights would be appreciated

by **SteveM** » Mon Feb 28, 2011 5:54 pm

In the 500 series you probably want to be in the 2-3oz range for rubber power. Take a look at the 500 series builds by sigs30, he got the Stuka down to 32 grams.

sigs30's Stuka posted here:
http://balsamodels.com/phpBB/viewtopic. ... sc&start=0

His Rufe posted elsewhere:
http://www.virtualaerodrome.com/image_b ... category=0

by **Phugoid** » Mon Feb 28, 2011 6:15 pm

out of all of the 500 series the Hellcat is the one with the potentially lowest wing loading. Mine flies well at about 23g less rubber

http://balsamodels.com/phpBB/viewtopic. ... sc&start=0

by **Phugoid** » Mon Feb 28, 2011 6:18 pm

the link doesn't work, try again:

http://balsamodels.com/phpBB/viewtopic.php?t=1627

by **SteveM** » Mon Feb 28, 2011 6:19 pm

Phugoid wrote:out of all of the 500 series the Hellcat is the one with the potentially lowest wing loading. Mine flies well at about 23g less rubber

http://balsamodels.com/phpBB/viewtopic. ... sc&start=0

Try http://balsamodels.com/phpBB/viewtopic. ... sc&start=0

by **yobdab** » Mon Feb 28, 2011 10:30 pm

How much weight would be too much? Is there a limit?

by **supercruiser** » Tue Mar 01, 2011 8:55 pm

How much weight is too much? A former F-104 pilot told me that if you attach enough horsepower, anything will fly.

As a rule of thumb for rubber powered models, you want you wing loading to be .3 to .6 grams per square inch of wing area. There is a thread on this forum listing wing areas of various models. So just divide the model's total weight (grams) by the total wing area (square inches).

Yes, I'm mixing values and that is improper science but, I understand what it means.

Guillow's Model Builders Forum

flying weights

flying weights

Who is online