4503 series hellcat

Ask other modelers for a little help / knowledge ?

4503 series hellcat

Postby squirlye » Sat Nov 23, 2013 12:37 am

I picked up one of the new Guillows kits last weekend at Hobby lobby. They are going for $8.99, I picked up the Hellcat for a little over 5 bucks with the 40% off coupon. This is actually my first laser kit. I really like how everything is perfectly cut out. I started it earlier today and I should be done tomorrow. It comes with printed clear plastic covering instead of tissue. So I am not sure how that will go together. We are expecting a winter storm here in southern Az. So I hope to fly her next week sometime. So I took a few pictures of what is in the box and some of the assembly.ImageImageImageImageImageImageImage
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: 4503 series hellcat

Postby Wildpig » Sat Nov 23, 2013 9:16 am

Printed, clear plastic covering???

No see pics. :(
Wildpig
 
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: 4503 series hellcat

Postby squirlye » Sat Nov 23, 2013 10:24 am

for some reason the pictures disappeared. So here they are again. ImageImageImageImageImageImageImage
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: 4503 series hellcat

Postby squirlye » Sat Nov 23, 2013 3:37 pm

here is the Hellcat with its clear plastic covering. It was a pain to put on and impossible to be wrinkle free. I think I might take the covering off and use blue tissue later.ImageImage
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: 4503 series hellcat

Postby SteveM » Sat Nov 23, 2013 3:52 pm

The main objective of this series was to be a started series for kids looking to get into model making. Due to this they had to be quick and easy to build along with being great fliers.


Would you say this kit meets these goals or is the plastic covering not pulling its own weight?
SteveM
 
Posts: 498
Joined: Wed Oct 24, 2007 1:06 pm
Location: Beaverton, OR

Re: 4503 series hellcat

Postby squirlye » Sat Nov 23, 2013 11:54 pm

No the plastic covering is probably easier for a beginner. I am just saying that I was having a hard time putting it on. I think the 4500 series is great for beginners. When the weather clears up I will take it for a test flight.
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: 4503 series hellcat

Postby Wildpig » Sun Nov 24, 2013 9:45 am

Hey, that looks fun to try. :) 8)
Wildpig
 
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: 4503 series hellcat

Postby squirlye » Sun Nov 24, 2013 10:45 am

It took me about 2 day from start to finish. But that was because of time constraints, I also used Elmer glue. If you were to use super glue this could be built in 20 minutes or less. everything fit perfectly, I had problems except for time. Now I need to find time to do a test glide and trim it for flight. The kit came with some self adhesive weights for balancing. And not only is time my enemy, but where I live here in southern Az. it is always breezy.
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: 4503 series hellcat

Postby squirlye » Sun Nov 24, 2013 12:24 pm

ImageYea it sure is David, But whats funny is last year we got a lot of snow. we are almost 3500' and I think where you are at is about 1200' give or take a foot or 2 ? and depending what part of Marana you are in we can be as far apart as 60 miles. :)
squirlye
 
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.


Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 24 guests