Re-shrinking tissue.

Ask other modelers for a little help / knowledge ?

Re-shrinking tissue.

Postby tpwpny » Fri Feb 05, 2016 8:51 am

Is it okay to re-spray a tissue covering with water? I had a taught frame after my initial spray but the tissue seems to have loosened a bit after a week or so in limbo. Don't want to do any damage to my first model. Any advice appreciated.
tpwpny
 
Posts: 38
Joined: Wed Feb 03, 2016 2:19 pm
Location: Westchester County, NY

Re: Re-shrinking tissue.

Postby dirk gently » Fri Feb 05, 2016 10:57 am

Have you doped the tissue?
dirk gently
 
Posts: 71
Joined: Mon Mar 25, 2013 1:50 pm
Location: Poznań, Poland

Re: Re-shrinking tissue.

Postby tpwpny » Fri Feb 05, 2016 2:34 pm

dirk gently wrote:Have you doped the tissue?


Not yet.
tpwpny
 
Posts: 38
Joined: Wed Feb 03, 2016 2:19 pm
Location: Westchester County, NY

Re: Re-shrinking tissue.

Postby BillParker » Fri Feb 05, 2016 2:49 pm

Then dope it. 2 coats, 50/50 thinned...

bp
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas

Re: Re-shrinking tissue.

Postby dirk gently » Fri Feb 05, 2016 2:50 pm

I would just dope it then and let the dope shrink the tissue. Doped covering will also be less susceptible to becoming loose again.
But respraying with water will probably also work.
dirk gently
 
Posts: 71
Joined: Mon Mar 25, 2013 1:50 pm
Location: Poznań, Poland

Re: Re-shrinking tissue.

Postby Chris A. » Fri Feb 05, 2016 5:51 pm

I learned to be careful about respraying with water. If you get the wood too wet, the drying convering can induce warps into the wood in large pieces like stabilizers. Parker is on to the right method with thinned dope. I use Krylon as a mist. It drys fast and you can respray to get out the final wrinkles.
Chris A.
 
Posts: 92
Joined: Tue Apr 01, 2014 10:50 am

Re: Re-shrinking tissue.

Postby tpwpny » Sun Feb 07, 2016 11:21 am

BillParker wrote:Then dope it. 2 coats, 50/50 thinned...

bp


Is 50/50 dope sprayable with a spray bottle? Or brush recommended?
tpwpny
 
Posts: 38
Joined: Wed Feb 03, 2016 2:19 pm
Location: Westchester County, NY

Re: Re-shrinking tissue.

Postby davidchoate » Sun Feb 07, 2016 12:18 pm

You need to, or should seal the wood and tissue. I use Krylon clear, or Dope thinned. I have still had loosening, or wrinkling experiences due to humidity,and temperature changes.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA


Return to General Building Questions

Who is online

Users browsing this forum: Bing [Bot] and 18 guests