Silly question about 403 Spitfire LC

[Szyp]

This may seem like a silly question, but the only silly question is the one you don't ask...
How do I attach the balsa wheel covers to he landing gear/bottom of wing? The instructions are basically silent on this, and I have worked a lot of hours on this 403 Spitfire to not get this right. Any help or suggestions will be appreciated.

[Szyp]

Another silly question- glue to what? I have the wire wrapped with plastic hosing to the plans dimensions, and the gear mounted to the wing spars. Do you mean that I should glue the balsa wheel covers to the plastic hose, and if so, besides filling the hose with glue to keep it from twisting, how do I keep the balsa covers properly aligned- by gluing the top of the to the underside of the wing? This is what I like about modelling- you come upon something that seems so matter of fact, and it ends up a major situation requiring plenty of thought, and in this case, counting on more experienced model builders to tap into their experience. By the way, did I say thank you?

Thank you!

[Szyp]

Thank you- sounds like a good plan.

[Szyp]

I used small inner diameter clear flexible hose because metal tubing would not go over the gear after the wire had been bent to shape. I ten used the next size hosing, which matched the smaller hose outer diameter, over it, and for the rings I used a small slick of even larger hose. Painted it black. Looks good- nice and even on both sides and all angles, just wondering if someone had a trick attaching the landing gear covers.