HI HO silver

Ask other modelers for a little help / knowledge ?

HI HO silver

Postby cliffm » Sat Sep 03, 2011 2:47 am

Wow, that's a lot of sImageilver, but finally it's abImageout done.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby cliffm » Sat Sep 03, 2011 2:53 am

Some day I'll get the words and the flics in the same post. Anyways that's a lot of silver to paint in one shot and it still could have used a couple more coats with the airbrush but it looks good from where I see it. This has been the most challenging guillows kit so far, but it was still a lot of fun to do. There's a few small details left for some wintery day, but there are plenty of those on the way.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

p-38

Postby mustangman » Mon Sep 05, 2011 9:15 am

I like your job you did on your plane! I have one of these i bought on ebay that was started! I hope i can get it as good as yours!! Mark
mustangman
 
Posts: 103
Joined: Mon Sep 21, 2009 11:25 pm
Location: Wisconsin

Postby cliffm » Mon Sep 05, 2011 10:36 am

All the plastic incorporated into this plane is a true test of patience and perserverance. The other challenge is getting it put together straight and true.When I assembled the main pieces it was glued very lightly in places it would'nt be noticeable to separate for adjusting. Be very precise about the landing gear as this was a major pain to get matching and it does work nicely if you follow the plans to the "T". It is a good build and if you have questions I usually get on here daily. Have fun.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Squishyp38 » Mon Sep 05, 2011 2:36 pm

next challenge: building one to fly!
I'm doing that, and the plastic weighs like 5 pounds!
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
 
Posts: 240
Joined: Sun Feb 27, 2011 8:08 pm
Location: Top Secret

Postby cliffm » Tue Sep 06, 2011 7:49 pm

I guess the old saying about put enough power on anything and it will fly. Looking at the p-38 gives me the impression of very poor aerodynamics,but having seen Lefty Gardner in Reno says it flies quite well. So, good luck in your endeavor and I hope you'll post some pics of it flying.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Szyp » Wed Sep 07, 2011 1:37 pm

What type of paint did you use in your airbrush? :?:
Szyp
 
Posts: 198
Joined: Fri May 27, 2011 4:10 pm

Postby cliffm » Wed Sep 07, 2011 7:09 pm

A bottle from wal-mart craft section called sterling silver metallic by Folkart
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Szyp » Wed Sep 07, 2011 7:12 pm

Thank you!!
Szyp
 
Posts: 198
Joined: Fri May 27, 2011 4:10 pm

power

Postby yellowlynn » Wed Sep 07, 2011 7:55 pm

Cliff, I remember that saying about having enough power and anything will fly. That saying came up when the C-124 was the big hauler. Remember that?

Lynn
yellowlynn
 
Posts: 41
Joined: Thu May 26, 2011 10:20 am
Location: Whitehouse, Texas

Postby cliffm » Thu Sep 08, 2011 1:20 am

I can't say I am privy to that particular plane I always think of the Gee Bee racers when that old saying comes up.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D


Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 18 guests

cron