Guillow's Model Builders Forum

a place to talk planes !!

Skip to content

Cessna 180 Group Build

Ask other modelers for a little help / knowledge ?
Post a reply

Joining the two fuselage halves

Postby Phugoid » Sun Oct 23, 2011 4:31 pm

F
Last edited by Phugoid on Sat Apr 05, 2014 2:19 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby Phugoid » Sun Oct 23, 2011 4:34 pm

T
Last edited by Phugoid on Sat Apr 05, 2014 2:20 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby BillParker » Sun Oct 23, 2011 6:02 pm

Hummmm...

My kit came from E-Bay, and guess what? No landing gear. Have to make my own. Cpuld sombuddy give me some dimensions? Width height?

Oh and the prop is missing as well... What diameter? I'm sure I've got a few in stock...

Thanx, guys!


bp
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas
Top

Re: Cessna 180 Group Build

Postby simpleflyer » Sun Oct 23, 2011 9:48 pm

Gu600_CE-180_LG.jpg

Here you go, Bill. If you can use them, I've some extra props and rubber that you can have, free, as I don't need them for SC :wink:
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas
Top

Re: Cessna 180 Group Build

Postby BillParker » Sun Oct 23, 2011 10:26 pm

nice drawing! Thank you!

I'll get Cindy Lou to print it, and I got it licked!

I got the prop, no perspiration!

bp
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas
Top

Re: Cessna 180 Group Build

Postby cutter » Tue Oct 25, 2011 5:47 pm

Image
Start of the nose block

Image
My landing gear. I filed a small channel for the wire to sit in.
Last edited by cutter on Wed Oct 26, 2011 5:20 pm, edited 1 time in total.
cutter
 
Posts: 47
Joined: Thu Oct 06, 2011 10:45 am
Location: New Jersey
Top

Re: Cessna 180 Group Build

Postby Phugoid » Wed Oct 26, 2011 2:13 am

:wink:
Last edited by Phugoid on Sat Apr 05, 2014 2:20 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby ADW 123 » Wed Oct 26, 2011 5:16 pm

I would be careful about anything that is going to weaken the landing gear parts. If you build the plane light, then there are no wories about it breaking off on landing, but just to be careful. Also, when i make my landing gear for this series, I fill in the area around the landing gear with balsa instead of phugoids method with glue or filler. i add it around the edges of the part at least (i usually end up adding more near the actual wire to hold it in better) you could probably get away with building it per the plan but these little things will help improve the effectivness of the parts. Like i like to say, lots of different ways to do the same thing.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio
Top

Re: Cessna 180 Group Build

Postby Phugoid » Thu Oct 27, 2011 11:42 am

w
Last edited by Phugoid on Sat Apr 05, 2014 2:20 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby BillParker » Thu Oct 27, 2011 12:19 pm

If thing hits something hard enuff to tear up the landing gear...

think... um..

SMOKING HOLE IN THE GROUND?

Mine is done up in yellow glue, and happy...
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas
Top

Re: Cessna 180 Group Build

Postby BillParker » Fri Oct 28, 2011 10:17 am

Build photos at:

http://www.parkerinfo.com/ap84.htm

Rather than baggies, I have tupperware lunchmeat containers for sorting out the parts...

Image

as per plan:

Image

I like to put the 1/16 square sticks on the outside of the tailfeather structure as it precludes warpage during the dopage...

Image

again, as per plan:

Image

wangs:

Image

Just like ya'll did it...

Image

Tape helps loads:

Image

First mock-up....

Image




more soonest...


bp
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas
Top

Re: Cessna 180 Group Build

Postby Phugoid » Sun Oct 30, 2011 8:42 am

Th
Last edited by Phugoid on Sat Apr 05, 2014 2:21 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby Phugoid » Sun Oct 30, 2011 8:44 am

T
Last edited by Phugoid on Sat Apr 05, 2014 2:21 am, edited 2 times in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby Phugoid » Sun Oct 30, 2011 8:45 am

O
Last edited by Phugoid on Sat Apr 05, 2014 2:22 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top

Re: Cessna 180 Group Build

Postby Phugoid » Sun Oct 30, 2011 8:49 am

I
Last edited by Phugoid on Sat Apr 05, 2014 2:22 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am
Top
PreviousNext
Post a reply

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Group Install phpBB
cron