Javelin build

Ask other modelers for a little help / knowledge ?

Re: Javelin build

Postby stx44 » Thu Nov 21, 2013 6:27 am

Ive been trying the Edge prop on my Javelin the last week, and to be honest, Im not that impressed.

Im thinking that its do with the angle and blade shape, but I think it actually flew better on the 6" kit prop.

Having said which, give it a go yourself and make your own mind up.
stx44
 
Posts: 92
Joined: Wed Aug 28, 2013 9:15 am

Re: Javelin build

Postby davidchoate » Mon Jan 06, 2014 3:50 am

Image
Image
Image
Image
The Mighty Javelin had an extreme impact with an engine hoist. I'm sorry it did'nt make it's 25 missions. I believe I have a higher attrition rate than the Army Air Corps in 1943,but anyway, now I can make a new one, and enter it along with the Cub95 in the G Challenge.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Mon Jan 06, 2014 3:57 am

The crashed plane. I'm still having problems . I jImage
ust learned to download yesterday. Image
taught me. He's a real good dude.Image
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Thu Feb 13, 2014 5:51 pm

i had off today thanks to weather, and began working on my Javelin MK:II. I am using the same wing and tail, but rebuilding the entire fuselage with improvement. pics soon. I have not been posting so much because I am working on a non Guillows plane. but am almost ready to get back on my stearman.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Sat Feb 15, 2014 6:47 pm

i got some 1/64 plywood from my hobby store. I am going to strengthen the fuselage aheab of the rubber attachment dowel, and use 1/32 ply on the B formers, and basswood on the cross pieces. I had to add 7g ballast to nose last time, and the way I sere it if I gotta add weight anyway I might as well put it to use.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Tue Feb 18, 2014 3:52 pm

adding strength. lightening tail
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Wed Feb 19, 2014 12:39 am

i found that thick covering. theysell it in an envelope. It is not silk; it's nylon with a smooth side, and must be installed wet; as it does not shrink.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Wed Feb 19, 2014 1:03 pm

i used alot of 1/64 ply . landing gear etc...I can't use it for G challenge cause I didnt use the kit wood.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Fri Feb 21, 2014 10:40 am

i'm almost done the new fuselage. I did some infilling to balance. I need no weights now,and I used 1/32, or 1/64 ply on any problem areas I had on the first model. the 1/64 ply is near 10bucks for a 8by10" piece.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Mon Feb 24, 2014 7:32 am

my Javelin is ready for covering.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Thu Feb 27, 2014 11:03 pm

The Javelin MKll is almost ready.
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby davidchoate » Fri Feb 28, 2014 7:48 am

same wing and tail
You do not have the required permissions to view the files attached to this post.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Javelin build

Postby yellowlynn » Sat Mar 01, 2014 4:37 pm

Everybody talks about how good the Javelin flies. I've had one for a while, so decided to open it up and go. If I couldn't make it fly, I could always try swinging it. I'd get working on mine for a while then come look at the progressive pictures of yours. It never worked out, they were always different. After 5 days of this.......Brilliant flash. I saw the wings all the time, but suddenly I found out mine was the Lancer. That leaves me in a quandary; am I stoopid or jest ignernt? I'm enjoying myself, and nothing has changed. I just thought someone might get a chuckle, or even a guffaw out of this. They say "If all else fails, read the instructions". Now I can add "Read the box".

Lynn
yellowlynn
 
Posts: 41
Joined: Thu May 26, 2011 10:20 am
Location: Whitehouse, Texas

Re: Javelin build

Postby stx44 » Sat Mar 01, 2014 7:26 pm

He he.

Yep, that made me chuckle. Mostly cos its something I would do!
stx44
 
Posts: 92
Joined: Wed Aug 28, 2013 9:15 am

Re: Javelin build

Postby davidchoate » Sat Mar 01, 2014 8:52 pm

THE jAV FLIES BEST WITH THE KIT PROP. i ALSO TRIED VARIOUS PROPS, AND FOUND THE KIY PROP BEST, ALSO, IT DOES NOT ;LIKR ANY WIND AT ALL. MY INDOOR FLIGHTS WERE PERFECT.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

PreviousNext

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 27 guests