2022 Black Sheep 500 Series Contest

Ask other modelers for a little help / knowledge ?

2022 Black Sheep 500 Series Contest

Postby kittyfritters » Sun Aug 07, 2022 8:48 pm

Went to the Black Sheep Squadron Guillow's 500 series at the "Grassy Knoll" this morning. It was hot and (hit 104 F a bit later) and the wind came up and blew us out about 10:30. Dave Gee was first, P-40, Don Butman second, Spitfire, and myself third, Hellcat.

Dave got an interesting lesson in model finishing on the field. When deciding on a color scheme remember where you are going to fly it! (See photos.) He says that the next military model he builds to fly there will have a target tug paint scheme.

KF
You do not have the required permissions to view the files attached to this post.
kittyfritters
 
Posts: 700
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Re: 2022 Black Sheep 500 Series Contest

Postby Scott » Fri Aug 12, 2022 5:01 pm

A very well concealed P-40,the enemy will never spot it from the air. :)
Hawker Sea Fury FB.11 VF-871
Royal Canadian Navy
Scott
 
Posts: 175
Joined: Mon Feb 15, 2010 10:57 am
Location: Ontario,Canada

Re: 2022 Black Sheep 500 Series Contest

Postby kittyfritters » Mon Aug 15, 2022 3:47 pm

My personal lesson from the contest was that I need to pay attention to stresses when I make a modifications.

My Hellcat, an old, die cut kit (15 lb wood) built 12 years ago was extensively lightened. I had run the parts sheets through a thickness sander and even with the old wood it came out at 28 grams with rubber. I have been building a torque box under the cowls of some Guillow's models with full plastic cowls to support a removable nose block. (The pictures are from a Rufe build, not the Hellcat.) The torque box was glued directly to the face of former F1. This, along with an agressive, but heavy, Ikara prop, actually provided enough weight in the nose to balance it with all the lightening. As it turned out I should have added some 1/16 square stock to provide more glue surface where the box was glued to the former because a mildly bad landing broke the torque box off the former and with the cowl glued to the fuselage there was no easy way to repair it at the field.

KF

3692.jpg

3693.jpg
You do not have the required permissions to view the files attached to this post.
kittyfritters
 
Posts: 700
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Re: 2022 Black Sheep 500 Series Contest

Postby Ray Klein » Wed Aug 17, 2022 12:21 pm

I lost a Me 109 because of the camo splinter scheme. I can relate. Lol
Ray Klein
 
Posts: 33
Joined: Wed Jun 15, 2022 9:29 am

Re: 2022 Black Sheep 500 Series Contest

Postby Bill Gaylord » Sun Sep 04, 2022 1:31 pm

When I first flew my AR 16/43-19 the ailerons were to small and was barely controllable. It hit lines close to a tree line, and came down easily repairable, other than a nacelle coming off. I looked forever in the area and could not find it. Finally I looked up in the trees, and it managed to lodge itself about 12 feet up, of course with the camo facing down and blue facing up. It was very well camouflaged.
You do not have the required permissions to view the files attached to this post.
Bill Gaylord
 
Posts: 904
Joined: Sun Nov 09, 2008 1:29 pm
Location: Grove City PA

Re: 2022 Black Sheep 500 Series Contest

Postby Scott » Mon Sep 05, 2022 4:40 am

Great work on that model,Bill.
Hawker Sea Fury FB.11 VF-871
Royal Canadian Navy
Scott
 
Posts: 175
Joined: Mon Feb 15, 2010 10:57 am
Location: Ontario,Canada


Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 4 guests