MESSERCHMITT PRINTWOOD

[Angus]

Mike, I am glad I could help and well done on finding that book!

When you are out getting that balsa wood, find a bunch of flowers too....

Happpy Building!

[mikethe hamster]

Thanks Angus.My wife (who has had internet for a long time)informed me that I have pretty much broken every possible rule of forum ettiquete in existence.Conciquently should shut the hel@ up until I have an actual ontopic question(same advice she gave when I met her family).Didn't listen then and her dad still wants me flogged,tarred,and feathered once a year if not more.

[mikethe hamster]

By the way found good tip on sanding printwood on SFA using piano wire.Lay what ever width you wish for the printwood next to the appropriate diameter of piano wire (you want 1/16th wood find 1/16th pianowire).lay wire paralel to long sides of wood and sand away.wire stops block =1/16th printwood.I actually used 2 metal straight edges and worked great.

[scigs30]

http://balsamodels.com/phpBB/viewtopic. ... highlight=