Guillows Mustang 900 series build

[scigs30]

I used Aerogloss Gloss dope. Thinned with Aerogloss thinner 50/50. I use a brush to brush on two coats.

[jack lee]

A real beauty!!

[dbcisco]

Sweet looking Mustang!

[Phugoid]

nice work Scigs

[ADW 123]

what is the best way to deal with makng the plane go in a circle when you are flying rubber power? i am building the piper super cub 95, and want to fly it rubber powered. i am going to build it with white glue instead of my normal CA glue. any tips and or advice would be apriciated. i built the Arrow a while back, and i tried to make it turn by angleing the rudder and adding side and down thrust. it turned and the wing hit the ground, and i would really like to avoid that with this one

[Supercubber95]

Hey Scigs! I just ordered the exact same kit. Hasn't got here yet. Is it a good flyer? And is it fairly easy to build? I hope mine looks as good as yours! I was wanting to put 2 narrow black stripes on the tail,but as the hobby store with black tissue is 65 miles away,I don't have any tissue. Can I use 2 strips of regular black colored paper without hindering flying ability,and looks? Thanks!

[ADW 123]

Check out phugoids 95. Its got a pretty good explanation. I also built one and posted it here so check it out to. Just search super piper cub 95 and u will find both

[Supercubber95]

Thanks ADW! I'm sorry. I forgot to mention I was talking about the Mustang . I built a Super Cub 95 also. It's my best flyer, and it always comes around in a big circle and lands at my feet. The tail surfaces are perfectly flat. I think it turns by itself because of the torque of the prop. Check out the pictures at: http://pipercessnahangar.shutterfly.com/pictures/10#9

Thanks

[scigs30]

Yes she is a good flyer, and easy to build.

[Supercubber95]

Thanks! She turned out real nice for my work !:wink:. Flies amazingly well! I did Light blue wings and tail, gray fuselage and yellow nose. Nice kit!